Classification of roads- 6 types of roads

Classification of roads or Types of road is an important topic in transportation engineering. It varies with different parameters. Let’s go through the important types of roads every civil engineer should know. We will see important details about cement concrete roads and types of road surface through the course of journey.

There are 6 basic types of roads depending on a mouthful of factors.

• Types of roads based on type of road surface
• Types of roads based on location and function
• Types of roads based on number of lanes
• Types of roads based on weather
• Types of roads based on the type of road pavement  
• Types of roads based on volume of traffic they handle  

We are going to sneak peep into types of roads in detail.

This category in the types of roads is based on the type of road surface used in the construction. These can be divided into 7 types.

• Natural earth roads
• Gravel roads
• Kankar roads
• Moorum roads
• WBM roads
• Bituminous roads
• Cement concrete roads

Now, let’s go deep into each of this.

These are the cheapest type of road and is used at the places where traffic is rare. The type of road surface used in these roads is soil. The pavement structure is totally made up of soil available at site. The performance of these roads mainly depend upon the effective maintenance and proper drainage.

These are intermediate between earthen and metalled roads. The carriage way of these roads is made by compacting a mixture of gravel and earth. These type of road surface usually consists of 26 percent sand, 13 percent clay and 61 percent gravel.

The type of road surface used in this classification of roads is Kankar. Kankar is impure form of limestone. Hard variety of kankar may be as strong as stones, but soft variety may be very weak. The road having pavement layer of kankar are termed as kankar roads. Traffic capacity of this type of road depends on the type of kankar used.

In this type of roads, Moorum is the material used for building the road. Moorum is obtained due to disintegration of igneous rocks by weathering agencies. In this road, the surfacing of the traffic way is constructed from Moorum. These type of roads are low and is equivalent to gravel and Kankar road in performance.

The broken stones of base and surface course, if any are bound by the stone dust in presence of moisture is called WBM rods. Total thickness may vary from 7.5 to 30cm depending upon the traffic.

Most of the roads around the world are constructed by using bitumen. It is also called flexible pavement because it changes according to nature of loads and sub base. This is an important member in the types of roads in India. For the road construction, the major concerns, as with concrete, are cost and durability.

• Highways
• Express ways
• Runways

Now, let’s meet cement concrete roads.

Cement concrete roads are the roads whose wearing surface is constructed with cement concrete. They are otherwise called concrete roads. They can be constructed either reinforced or plane type. Cement concrete roads are compatible to all weather conditions. It comes under rigid pavements. These are best suitable to roads having higher traffic.

• Parking aprons, taxiways and runway take off areas in airports
• Parking grounds for vehicles of heavy weight
• Heavy duty Industrial floors (vehicles on tracks and military tanks)
• Floors for handling and storage of containers at ports
• Industrial floors with high requirements in terms of flatness and durability to abrasion and surface exposure to aggressive attacks (use of toxic materials, welding etc)
• Bridge decks
• Road pavements in long tunnels for fire safety reasons, immediate reuse of the road following a fire and better energy consumption during service life (lower intensity lighting required)
• Pavements at toll stations (resistance to braking and acceleration)

Now, let’s move on to the next classification of roads.

Related posts from vincivilworld

Roads can be classified according to the location and function as follows.

• National highways

• Highways

• District roads

• Village roads

Going deep to each of them,

Main highway runs through the length and breadth of the country. Roads connecting the neighbouring country. are also called national highways. Roads connecting the neighbouring countries are also called national highways. It should have high class surface finishing together with adequate structural strength.

These are the main roads within a state. These connect important towns and cities of the state. Highways should be two lane wide, but if it is one lane only, it must be provided with wide shoulder.

These roads should carry the traffic to the interior rural areas. These roads are considered as main branches from NH or SHs. District roads are of 2 types. Major district roads and other district roads.

These roads are mainly meant for village roads use. These connect villages with each other and also with nearby towns. These roads can be stabilised each roads, but if metal surface is provided it can serve more useful purpose.

Moving on to the third classification…

You might have observed this type of classification while you travelled. There are mainly 4 types as given below.

• Single lane road- having only one lane for to and for mobility.
• Double lane road- having two lanes for direction to opposite sides
• Three lane road- having three lanes for movement in a road
• Multi lane road- having more than three lanes for vehicle movement.

The decision on which of the above lanes is to be chosen is based on the traffic.

The next classification of roads is based on the geographic location of the roads.

These are of 2 types.

1. All weather roads- Roads which are compatible to all weather conditions. Types of roads in India should mostly belong to this type. Because the weather conditions are extreme.

2. Fair weather roads- Roads which are not compatible to worse weather conditions.

Next is an interesting classification based on the geometry of roads.

• Parallel roads- These are local roads running parallel to a higher-speed, limited-access road
• Unparallel roads- These are local roads that don’t run parallel to a higher speed and limited access road. The village roads that connect small geographical places best fit for this classification other than other types of roads in India.

Cool. Let’s jump into the last classification of a road.

Roads can be classified depending on the traffic through it.

• Light traffic road- Road carrying up to 400 veh/ day
• Medium traffic road- 400- 1000 veh/day
• Heavy traffic road- More than 1000 veh/day

That’s it. Any doubts or comments? Drop it in the comments. Let’s dwell on more.

MUST READ: Traffic signals in India- All types simplified